Darksaber Lightsaber
Darksaber Lightsaber
Share
RGB vs XENOPIXEL
RGB vs XENOPIXEL
Function | RGB Upgrade | XENO Pixel 3.0 |
Sound effects | 16 sets | 27sets/34 sets |
Color change | 16 kinds + infinitely variable colors | 16 kinds + infinitely variable colors |
Light effects | 3 kinds | 8 kinds |
Power on animation | 3 kinds (two of them can be turned on by default off) | 12 kinds (5 of them can be turned on by default off) |
Specific switch mode | Rotary switch, push-pull switch, swing switch, button | Rotary switch, push-pull switch, swing switch, push button |
Battery capacity/specification | 3000mA | 3600mA |
Blade specification | 82/92cm, 2mm wall thickness | 82/92cm, 2mm wall thickness |
Blade mode | Normal light / micro-flash / burst flash | Stable light effect, pulse light effect, rainbow light effect, candy light effect, unstable mode, crack blade, flamer mode, flash mode |
SD card | Yes | Yes |
DIY | Support(New sound/parameter adjustment, etc.) | Support cell phone control(New sound effects/parameter adjustment, etc.) |
Blade material | PC | PC |
Packing list | Instruction manual, charging cable (without charging head), tools Bag, blade, handle | Instruction manual, charging cable (without charging head), tool kit, blade, handle, card reader, sword frame, sword sieve |
Method of use
Method of use
When Saber Blade is on | When Saber Blade Is Off | ||
Control | Effect | Control | Effect |
Hold button and clash hilt | Lock UP | Button LED flash one time (Hold button 0.5 seconds) |
Adjust Volume |
Button LED flash one time (Hold button 0.5 seconds) |
Drag | Button LED flash two times (Hold button 1 second) |
Change Light Effect |
Button LED flash two times (Hold button 1 second) |
Infinite Color Change | Button LED flash three times (Hold button 1.5 seconds) |
Change Blade Mode |
Button LED flash three times (Hold button 1.5 seconds) |
Turn Off Saber | Button LED flash four times (Hold button 2 seconds) |
Change to last Font |
Point down hilt, hold the button and twist (Counterclockwise and then clockwise) |
Standard Color Change | Point down the hilt and twist Counterclockwise and then clockwise) |
Change to Next Font |
Point down hilt, hold the button and twist (Clockwise and then counterclockwise) |
Twist Color Change | point up hilt and twist (counterclockwise and then clockwise) |
Play Music |
point up the hilt, hold button and twist (Clockwise and then counterclockwise) |
Force Effect | ||
Click button | Blaster/Blaster Deflect | ||
Thrust the hilt forward | Stab | ||
spin the hilt quickly | Spin | ||
Hold button, and stab hilt (Twist to change melt color) |
Melt | ||
Hold button and pull hilt inwards | Lightning Block | ||
Enter into LOCK UP first, Then button LED flash one time (Hold button 0.5 second) |
Multi Lock Mode | ||
hold button and swing saber (Same control to exit mode) |
Multi Block Mode | ||
Hold button 10 seconds (After saber blade is off) |
Deep Sleep/Deactivate Saber | ||
Hold button 10 seconds (When saber blade is off) |
Pixel to RGB/RGB to Pixel |
Troubleshooting
Troubleshooting
Remove the battery and check the battery contact
plates, to ensure they are making contact. Gently bend
them out if they are not making contact, reinsert the
battery, and turn on the saber if there is no response
charge again. (if possible, use an external charger).
② Saber has no swing, hum, or clash sounds?
Usually, this is from low battery power. Charge the saber
for. hours. In Xeno, ensure files are set up on the micro SD
card, and ensure the micro SD card is seated properly
③ Saber stops working suddenly?
Remove the battery and check the contact plates.
Reinsert the battery, charge the saber, and try again. lf
If there is no response, contact your seller.
Saber is hot near the emitter?
it is normal for the LED in the emitter to generate heat.
but the emitter should diffuse most of the heat. As such
please do not turn on the electronics outside of a hill, as
the heat may damage the chassis without the aluminum
emitter to diffuse the heat.
A legendary saber of incredible might that is covered in mystery and legend and was initially believed to be crafted by the Mandalorian Jedi. It is considered to be one of the most formidable and coveted weapons in the entire Galaxy. It is believed that the saber grants its wielder immense power and strength.
The sturdy polycarbonate flat blade includes the crackling signs of the black-energy blade along the edge without dulling the sense of actual power that emanates from this highly treasured symbol of authority. This is the same design of the fabled saber used as part of the series that could change the leadership of the faith-based bounty hunters forever. The rounded design along the T6 Aircraft Aluminum hilt meets the rail hand guard perfectly, allowing the user to see a little bit of the chosen color that makes up the rest of the saber.
This is a prized collector’s item that many of our clients request due to the popularity of the current featured series. Since the release space western’s release in 2019, the world has been captivated by the relationship of bounty hunter and child. This is your chance to bring home a fundamental piece of this epic story that is surly to unfold in the coming years on streaming. So be sure to pick up your Mando saber before our supplies run out!
#lightsaber #jedi #sith #darthvader #theforce #kyloren #yoda #lukeskywalker #hansolo #theforceawakens #c3po #darkside #rogueone #rey #starwarstheforceawakens #darthmaul #r2d2 #skywalker #stormtrooper #starwarsart #obiwankenobi #bobafett #finn #starwarsnerd #vader #anakin #princessleia #anakinskywalker #starwars #deathstar
These are great and a fraction of the cost. I have not been gentle with these and they just keep going and going and...
100% worth it. Every single penny! So much fun and the sounds effects are decent enough. I love these things! So does my teen son. So do my 2 year old twins for that matter. They're quality.
We got the saber for our teenage son and he absolutely loves it! We were very pleased with how it works and how stable it is. Very sturdy. Our teenage daughter is also loving it, as they are both Star Wars fans.
We would definitely recommend it and wouldn’t hesitate to buy it again