Dupengda
Blade of light saber
Blade of light saber
Couldn't load pickup availability
Share
RGB vs XENOPIXEL
RGB vs XENOPIXEL
| Function | RGB Upgrade | XENO Pixel 3.0 |
| Sound effects | 16 sets | 27sets/34 sets |
| Color change | 16 kinds + infinitely variable colors | 16 kinds + infinitely variable colors |
| Light effects | 3 kinds | 8 kinds |
| Power on animation | 3 kinds (two of them can be turned on by default off) | 12 kinds (5 of them can be turned on by default off) |
| Specific switch mode | Rotary switch, push-pull switch, swing switch, button | Rotary switch, push-pull switch, swing switch, push button |
| Battery capacity/specification | 3000mA | 3600mA |
| Blade specification | 82/92cm, 2mm wall thickness | 82/92cm, 2mm wall thickness |
| Blade mode | Normal light / micro-flash / burst flash | Stable light effect, pulse light effect, rainbow light effect, candy light effect, unstable mode, crack blade, flamer mode, flash mode |
| SD card | Yes | Yes |
| DIY | Support(New sound/parameter adjustment, etc.) | Support cell phone control(New sound effects/parameter adjustment, etc.) |
| Blade material | PC | PC |
| Packing list | Instruction manual, charging cable (without charging head), tools Bag, blade, handle | Instruction manual, charging cable (without charging head), tool kit, blade, handle, card reader, sword frame, sword sieve |
Method of use
Method of use
| When Saber Blade is on | When Saber Blade Is Off | ||
| Control | Effect | Control | Effect |
| Hold button and clash hilt | Lock UP | Button LED flash one time (Hold button 0.5 seconds) |
Adjust Volume |
| Button LED flash one time (Hold button 0.5 seconds) |
Drag | Button LED flash two times (Hold button 1 second) |
Change Light Effect |
| Button LED flash two times (Hold button 1 second) |
Infinite Color Change | Button LED flash three times (Hold button 1.5 seconds) |
Change Blade Mode |
| Button LED flash three times (Hold button 1.5 seconds) |
Turn Off Saber | Button LED flash four times (Hold button 2 seconds) |
Change to last Font |
| Point down hilt, hold the button and twist (Counterclockwise and then clockwise) |
Standard Color Change | Point down the hilt and twist Counterclockwise and then clockwise) |
Change to Next Font |
| Point down hilt, hold the button and twist (Clockwise and then counterclockwise) |
Twist Color Change | point up hilt and twist (counterclockwise and then clockwise) |
Play Music |
| point up the hilt, hold button and twist (Clockwise and then counterclockwise) |
Force Effect | ||
| Click button | Blaster/Blaster Deflect | ||
| Thrust the hilt forward | Stab | ||
| spin the hilt quickly | Spin | ||
| Hold button, and stab hilt (Twist to change melt color) |
Melt | ||
| Hold button and pull hilt inwards | Lightning Block | ||
| Enter into LOCK UP first, Then button LED flash one time (Hold button 0.5 second) |
Multi Lock Mode | ||
| hold button and swing saber (Same control to exit mode) |
Multi Block Mode | ||
| Hold button 10 seconds (After saber blade is off) |
Deep Sleep/Deactivate Saber | ||
| Hold button 10 seconds (When saber blade is off) |
Pixel to RGB/RGB to Pixel | ||
Troubleshooting
Troubleshooting
Remove the battery and check the battery contact
plates, to ensure they are making contact. Gently bend
them out if they are not making contact, reinsert the
battery, and turn on the saber if there is no response
charge again. (if possible, use an external charger).
② Saber has no swing, hum, or clash sounds?
Usually, this is from low battery power. Charge the saber
for. hours. In Xeno, ensure files are set up on the micro SD
card, and ensure the micro SD card is seated properly
③ Saber stops working suddenly?
Remove the battery and check the contact plates.
Reinsert the battery, charge the saber, and try again. lf
If there is no response, contact your seller.
Saber is hot near the emitter?
it is normal for the LED in the emitter to generate heat.
but the emitter should diffuse most of the heat. As such
please do not turn on the electronics outside of a hill, as
the heat may damage the chassis without the aluminum
emitter to diffuse the heat.
Unleash Your Galactic Fantasy with Our Lightsaber Blades
Experience the ultimate adventure with our range of lightsaber blades, available in two dynamic models: RGB and Xenopixel. Choose from lengths of 82cm/32'' or 92cm, both crafted from durable PC material.
RGB Blade: Radiant Spectrum of Colors
Our RGB blade offers a mesmerizing spectrum of colors that you can control at your fingertips. Immerse yourself in a dynamic visual display as you switch between shades that match your mood and style.
Xenopixel Blade: Unmatched Realism and Precision
Step into a new realm of authenticity with the Xenopixel blade. Featuring advanced technology, it delivers an unparalleled experience, mimicking the iconic lightsaber effects seen in movies. Each swing and clash is met with a stunning display of light.
Two Length Options for Every Enthusiast
Whether you prefer the compact agility of 82cm/32'' or the commanding presence of 92cm, we have a length to match your preferences. Each blade ensures a balanced and comfortable wielding experience, empowering you to dominate your battles.
Built to Withstand, Designed for Perfection
Crafted from durable PC material, （2mm thickness)our blades are engineered to endure rigorous duels and clashes. Their robust construction ensures they remain intact, even in the heat of the battle, guaranteeing longevity and continued enjoyment.
Ignite Your Imagination Today
Equip yourself with a lightsaber blade that embodies both elegance and strength. Choose the RGB or Xenopixel model in your desired length and embark on an unforgettable journey. Your fantasies await – grab your blade and ignite the power within.
Indulge in the perfect blend of innovation, artistry, and craftsmanship. Elevate your collection with our lightsaber blades, designed to captivate both enthusiasts and fans alike.
Delivered in time with exquisite customer care.
Blade well crafted and balanced. Fits in every 1" socket and Works fine with any neopixel board. Sturdy built. Should you need to remove the pixel string, be sure to unscrew both tip and base with same pace not to overtwist and pluck wirings
