Dupengda
Space Lightsaber Force FX Heavy Dueling Atlantis lightsaber
Space Lightsaber Force FX Heavy Dueling Atlantis lightsaber
Couldn't load pickup availability
Share
RGB vs XENOPIXEL
RGB vs XENOPIXEL
| Function | RGB Upgrade | XENO Pixel 3.0 |
| Sound effects | 16 sets | 27sets/34 sets |
| Color change | 16 kinds + infinitely variable colors | 16 kinds + infinitely variable colors |
| Light effects | 3 kinds | 8 kinds |
| Power on animation | 3 kinds (two of them can be turned on by default off) | 12 kinds (5 of them can be turned on by default off) |
| Specific switch mode | Rotary switch, push-pull switch, swing switch, button | Rotary switch, push-pull switch, swing switch, push button |
| Battery capacity/specification | 3000mA | 3600mA |
| Blade specification | 82/92cm, 2mm wall thickness | 82/92cm, 2mm wall thickness |
| Blade mode | Normal light / micro-flash / burst flash | Stable light effect, pulse light effect, rainbow light effect, candy light effect, unstable mode, crack blade, flamer mode, flash mode |
| SD card | Yes | Yes |
| DIY | Support(New sound/parameter adjustment, etc.) | Support cell phone control(New sound effects/parameter adjustment, etc.) |
| Blade material | PC | PC |
| Packing list | Instruction manual, charging cable (without charging head), tools Bag, blade, handle | Instruction manual, charging cable (without charging head), tool kit, blade, handle, card reader, sword frame, sword sieve |
Method of use
Method of use
| When Saber Blade is on | When Saber Blade Is Off | ||
| Control | Effect | Control | Effect |
| Hold button and clash hilt | Lock UP | Button LED flash one time (Hold button 0.5 seconds) |
Adjust Volume |
| Button LED flash one time (Hold button 0.5 seconds) |
Drag | Button LED flash two times (Hold button 1 second) |
Change Light Effect |
| Button LED flash two times (Hold button 1 second) |
Infinite Color Change | Button LED flash three times (Hold button 1.5 seconds) |
Change Blade Mode |
| Button LED flash three times (Hold button 1.5 seconds) |
Turn Off Saber | Button LED flash four times (Hold button 2 seconds) |
Change to last Font |
| Point down hilt, hold the button and twist (Counterclockwise and then clockwise) |
Standard Color Change | Point down the hilt and twist Counterclockwise and then clockwise) |
Change to Next Font |
| Point down hilt, hold the button and twist (Clockwise and then counterclockwise) |
Twist Color Change | point up hilt and twist (counterclockwise and then clockwise) |
Play Music |
| point up the hilt, hold button and twist (Clockwise and then counterclockwise) |
Force Effect | ||
| Click button | Blaster/Blaster Deflect | ||
| Thrust the hilt forward | Stab | ||
| spin the hilt quickly | Spin | ||
| Hold button, and stab hilt (Twist to change melt color) |
Melt | ||
| Hold button and pull hilt inwards | Lightning Block | ||
| Enter into LOCK UP first, Then button LED flash one time (Hold button 0.5 second) |
Multi Lock Mode | ||
| hold button and swing saber (Same control to exit mode) |
Multi Block Mode | ||
| Hold button 10 seconds (After saber blade is off) |
Deep Sleep/Deactivate Saber | ||
| Hold button 10 seconds (When saber blade is off) |
Pixel to RGB/RGB to Pixel | ||
Troubleshooting
Troubleshooting
Remove the battery and check the battery contact
plates, to ensure they are making contact. Gently bend
them out if they are not making contact, reinsert the
battery, and turn on the saber if there is no response
charge again. (if possible, use an external charger).
② Saber has no swing, hum, or clash sounds?
Usually, this is from low battery power. Charge the saber
for. hours. In Xeno, ensure files are set up on the micro SD
card, and ensure the micro SD card is seated properly
③ Saber stops working suddenly?
Remove the battery and check the contact plates.
Reinsert the battery, charge the saber, and try again. lf
If there is no response, contact your seller.
Saber is hot near the emitter?
it is normal for the LED in the emitter to generate heat.
but the emitter should diffuse most of the heat. As such
please do not turn on the electronics outside of a hill, as
the heat may damage the chassis without the aluminum
emitter to diffuse the heat.
1. The XenoPixel V3 XENO3.0 board is our latest, most cost-effective 2 in 1 motherboard / soundboard, which can realize free switching between pixel and RGB.
Pixel to RGB mode - Hold button 13 seconds when saber blade is OFF. After switching pixel to RGB mode, the blade only lights up the bottom,you should change the blade into RGB blade and use a pixel to RGB converter.
2. The xenopixel version includes a micro SD card defaultly, which allows you to add a vast library of sound fonts.
3. An array of new special blade effects make the XenoPixel V3 more versatile than any economy class board on the market.
4. Special blade light effects include Steady,Pulse,Rainbow blade,Candy blade, Unstable, Crack blade,Fire blade, Flash blade.
5. Ignition(Pre-on)/Blade Styles: 12 blade modes in total. Standard blade, Velocity blade, Torch blade, Blaster blade, Ghost blade, Broken ignition, Stack ignition, Photon ignition, Warp ignition, Phaster ignition, Scavenger ignition and Hunter ignition.
Tips: Velocity, torch, blaster & ghost mode are defaultly turn off.
6. XenoPixel V3 features a new firmware upgrade feature - by simply adding a special upgrade file.Now you can upgrade it by Bluetooth APP with ease.
7. XENO3.0 is 34 sets of sound fonts (these 34 sets are the same as before, no change).
Lightsaber Specs:
Durable and Comfortable Aluminum Hilt
12W RGB LED
3000mah 3.7V Rechangeable 18650 Battery
2mm Thickness 82cm Length PC Blade
23mm Electric Full-Range Speaker
Package Include:
1 x Handle with kit & Rechangeable Battery
1 x Blade (default length 82cm, Polycarbonate material support dueling)
1 x Charging Cable
1 x Accessories Bag
1 x User Manual
Notice: Double bladed sabers have got two blades, crossguard lightsabers have got one blade and two side short blades.
1. Support Bluetooth APP connection, and can be upgraded through Bluetooth to switch the machine on and off, change the color, adjust the volume, adjust the brightness and blade length, select the sound package and light effect, check the battery percentage, adjust the sensitivity, and restore the factory settings with one key, etc. configuration.
2. Using the XRGB 3.0/XENO3.0 2-in-1 soundboard to achieve more precise motion control through more sensitive sensors.
3. Use WAV original sound files to play, the audio is clearer and undistorted, and the high-fidelity power amplifier combined with 4W high-power speakers makes the sound louder.
4. Added high and low pitch waving, increase the tail sound of waving, and make the swing more realist and intense. You can feel the difference between you swing fast or slow.
5. Diversified color changing methods: fast color changing, rotation color changing, infinite color changing.
6. Diversification of somatosensory opening sabers: swing to turn on, rotate to turn on, pull and push to turn on.
7. A variety of light effects can be configured: percussion flash, sword fight, force, and gun light effects.
8. Added tail sounds for fighting saber, dragging saber, parrying and melting, which sounds smoother.
Bluetooth APP download method:
Search "Xeno Configurator" in the APP Store, or use the download link:
https://play.google.com/store/apps/details?id=com.xeno.configurator
Warranty
We provide 12 months warranty for each saber we sold.
Long time warranty make you order and play it without any worries.
