Dupengda
Inferno Blade
Inferno Blade
Couldn't load pickup availability
Share
RGB vs XENOPIXEL
RGB vs XENOPIXEL
| Function | RGB Upgrade | XENO Pixel 3.0 |
| Sound effects | 16 sets | 27sets/34 sets |
| Color change | 16 kinds + infinitely variable colors | 16 kinds + infinitely variable colors |
| Light effects | 3 kinds | 8 kinds |
| Power on animation | 3 kinds (two of them can be turned on by default off) | 12 kinds (5 of them can be turned on by default off) |
| Specific switch mode | Rotary switch, push-pull switch, swing switch, button | Rotary switch, push-pull switch, swing switch, push button |
| Battery capacity/specification | 3000mA | 3600mA |
| Blade specification | 82/92cm, 2mm wall thickness | 82/92cm, 2mm wall thickness |
| Blade mode | Normal light / micro-flash / burst flash | Stable light effect, pulse light effect, rainbow light effect, candy light effect, unstable mode, crack blade, flamer mode, flash mode |
| SD card | Yes | Yes |
| DIY | Support(New sound/parameter adjustment, etc.) | Support cell phone control(New sound effects/parameter adjustment, etc.) |
| Blade material | PC | PC |
| Packing list | Instruction manual, charging cable (without charging head), tools Bag, blade, handle | Instruction manual, charging cable (without charging head), tool kit, blade, handle, card reader, sword frame, sword sieve |
Method of use
Method of use
| When Saber Blade is on | When Saber Blade Is Off | ||
| Control | Effect | Control | Effect |
| Hold button and clash hilt | Lock UP | Button LED flash one time (Hold button 0.5 seconds) |
Adjust Volume |
| Button LED flash one time (Hold button 0.5 seconds) |
Drag | Button LED flash two times (Hold button 1 second) |
Change Light Effect |
| Button LED flash two times (Hold button 1 second) |
Infinite Color Change | Button LED flash three times (Hold button 1.5 seconds) |
Change Blade Mode |
| Button LED flash three times (Hold button 1.5 seconds) |
Turn Off Saber | Button LED flash four times (Hold button 2 seconds) |
Change to last Font |
| Point down hilt, hold the button and twist (Counterclockwise and then clockwise) |
Standard Color Change | Point down the hilt and twist Counterclockwise and then clockwise) |
Change to Next Font |
| Point down hilt, hold the button and twist (Clockwise and then counterclockwise) |
Twist Color Change | point up hilt and twist (counterclockwise and then clockwise) |
Play Music |
| point up the hilt, hold button and twist (Clockwise and then counterclockwise) |
Force Effect | ||
| Click button | Blaster/Blaster Deflect | ||
| Thrust the hilt forward | Stab | ||
| spin the hilt quickly | Spin | ||
| Hold button, and stab hilt (Twist to change melt color) |
Melt | ||
| Hold button and pull hilt inwards | Lightning Block | ||
| Enter into LOCK UP first, Then button LED flash one time (Hold button 0.5 second) |
Multi Lock Mode | ||
| hold button and swing saber (Same control to exit mode) |
Multi Block Mode | ||
| Hold button 10 seconds (After saber blade is off) |
Deep Sleep/Deactivate Saber | ||
| Hold button 10 seconds (When saber blade is off) |
Pixel to RGB/RGB to Pixel | ||
Troubleshooting
Troubleshooting
Remove the battery and check the battery contact
plates, to ensure they are making contact. Gently bend
them out if they are not making contact, reinsert the
battery, and turn on the saber if there is no response
charge again. (if possible, use an external charger).
② Saber has no swing, hum, or clash sounds?
Usually, this is from low battery power. Charge the saber
for. hours. In Xeno, ensure files are set up on the micro SD
card, and ensure the micro SD card is seated properly
③ Saber stops working suddenly?
Remove the battery and check the contact plates.
Reinsert the battery, charge the saber, and try again. lf
If there is no response, contact your seller.
Saber is hot near the emitter?
it is normal for the LED in the emitter to generate heat.
but the emitter should diffuse most of the heat. As such
please do not turn on the electronics outside of a hill, as
the heat may damage the chassis without the aluminum
emitter to diffuse the heat.
Introducing the Inferno Blade lightsaber, a stunning combination of gold, silver, white, with red and green gemstones that add a touch of sparkle and elegance. This lights is the perfect accessory for any cosplay or roleplaying enthusiast.
Crafted with the highest quality and attention to detail, the Inferno Blade lightsaber is both durable and visually breathtaking. hilt is decorated in a mesmerizing combination of gold, silver, and white, creating a and sophisticated look that is sure to impress.
The red and green gemstones are strategically placed the hilt, adding a touch of luxury and style. When activated, the LED blade glows in a bright red hue, creating an unforgettable visual experience.
Not only is this lightsaber for display, but it is also perfect for combat. The blade is removable, so you can it out with other compatible blades if you want to mix up your look. Plus, theilt is designed for easy grip, making it comfortable and easy to handle during intense battles.
, the Inferno Blade lightsaber is an exceptional piece of cosplay and roleplaying gear that will your expectations. Whether you’re a fan of the Star Wars universe or just looking for a and exciting way to express yourself, this lightsaber is sure to impress.
#83
My kids and I have gone through 6+ plastic lightsabers over the years. They always break.
This lightsaber is significantly more sturdy than the cheap ones out there, feels super solid as it’s metal with thick plastic, and it’s incredibly bright! Significantly better than any other lightsaber we’ve used. Especially when it’s on sale it’s not that much more than a cheap plastic one. I haven’t used any of the other $100-$200 ones so can’t compare.
The kids also love the different colors and the rainbow mode.
